Dash Restoration

A/C & D/C Wiring, GPS, Radios, etc.
User avatar
carl
Royal Aluminum Star
Posts: 218
Joined: Sun Feb 08, 2015 5:58 pm

Re: Dash Restoration

Postby carl » Sat Aug 19, 2017 9:38 pm

I did not receive the email. Both of the black plastic fuse holders in my dash cracked and crumbled in my hands when doing the dash restoration. The dash mount fuse holders are a very common item. I purchased my replacements at http://www.boatersplus.com The fuse holders I used were Item # 345-4205031 and they are made by Sea-Dog. I used a 10 amp circuit breaker on my fresh water pump circuit, this was the same as original. I purchase them through http://www.onlinecomponents.com Look at one of my other topic posts titled "Overhead 12 Volt Accessory Panel Restoration" I have all of the breaker information there for you to read.
1990 Marinette 32' Sedan Fly Bridge "IKOI"
Twin Crusader 350's (Closed Loop Cooling)
Bow to Stern Full On Restoration in Progress
Chickamauga Lake, Tennessee
A boat is always safe at shore, but that's not what its built for...

Aquaholic
Tin star
Posts: 40
Joined: Tue Aug 04, 2015 8:52 pm

Re: Dash Restoration

Postby Aquaholic » Fri Sep 01, 2017 10:12 pm

Thanks for the info and part numbers. I will definitely check out the other thread for the breaker info for future reference.
Aquaholic
1989 32 Marinette Sedan
McConnelsville OH
Muskingum River