Water in my front compartment

Things that are of general interest.
User avatar
Busia
Aluminum Star
Posts: 169
Joined: Tue Jul 15, 2014 12:21 am

Re: Water in my front compartment

Postby Busia » Thu Apr 20, 2017 1:42 pm

DougDoty wrote:My front and rear compartments are separated by the firewall in the engine area in my boat so I do not see any flow back and forth.

On mine there are notches in the ribs and stringers to allow water to drain down to the keel. Keep dirt out of these notches so the water is not dammed up. Water will flow forward when the boat is at rest and the bilge pump in the bow pumps it out. ( That is why the factory put a drain in the bow ) When underway, the water flows to the stern ( open the hatch and you can watch it ) One of the things on our list is to do is , as we leave the harbor is turn the bilge pumps on. The pump at the transom will pump the water out and I can watch it go overboard. When it stops we turn the pumps off.
BUSIA
located in Ketchikan, Alaska. Gods country
32 foot Marinette express. (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW

javalin390
Aluminum Star
Posts: 148
Joined: Sat Jan 10, 2015 7:14 pm
Contact:

Re: Water in my front compartment

Postby javalin390 » Thu Apr 20, 2017 6:48 pm

One would be surprised at the amount of condensation M's produce inside, just like a cold can of beer on a hot day.
Jim Elias
1974 37' SedanFlybridge
Twin 360 Chryslers.
Marblehead, Ohio

DougDoty
Tin star
Posts: 73
Joined: Fri Jul 11, 2014 9:26 pm
Location: Madison In.

Re: Water in my front compartment

Postby DougDoty » Thu Apr 20, 2017 8:43 pm

Just like a cold can of beer, quite the appropriate comparison. :)

My bilge water flows forward in both compartments, bilge pumps at low point of both, do not have one at the transom stern for when on plane, thinking of installing one.
1984 39 Marinette Sedan, " LIBERTY ONE " Warsaw KY, 440 chryslers, Westerbeke 9.0 kw , 1 3/8" shafts 93 1/4" long and 19x22 dyna quads or, 19x20 DQX's 38.5 MPH GPS best.


Return to “General Topics”

Who is online

Users browsing this forum: No registered users and 2 guests