MY 1966 26 ft 327 fireball

MetalHead
Site Admin
Posts: 236
Joined: Fri Jul 11, 2014 6:03 pm

Re: MY 1966 26 ft 327 fireball

Postby MetalHead » Fri Aug 25, 2017 6:19 am

Don't forget to use non metallic bushings

https://www.deepblueyachtsupply.com/non ... s-bearings
1959 Family Cruiser - Sold - Gary Dick - 12/05/14
1963 Express 31x10 - Sold - Joe & Ginger Tabor - 01/21/2017
1963 Express 31x8.5 - In Dry Dock - Restore Underway
1987 Sportsman - On Rolling Slip - Ready To Go !!!
Big BigM 's Rule !!!
Columbiana, AL

Hyperjump
Member
Posts: 18
Joined: Sun Jun 26, 2016 4:40 am

Re: MY 1966 26 ft 327 fireball

Postby Hyperjump » Sat Jun 02, 2018 10:47 am

Bin out for while , but got rudder shaft packing and prop shaft bushings done. Got to run boat today for first time since working on her. Ran good. Question is , would like to get new water pump for 327 fireball and or could I put electronic ignition on this motor. Water pump works. Temp was 140 - 150. Boat is being pulled out the 15th to have trim tabs installed and like to do all while out. Any suggestions on pump and ignition.
:D HYPERJUMP :D
1966 26 Ft Express
Saybrook , Ohio
Lake Erie

barefoot99
Tin star
Posts: 47
Joined: Sun Jul 13, 2014 9:44 pm
Location: Cincinnati OH

Re: MY 1966 26 ft 327 fireball

Postby barefoot99 » Sat Jun 02, 2018 1:07 pm

Lots of electronic ignition options. One of the easiest is a GM HEI set up , everything is readily available at auto parts stores. A better version of that set up is built by Davis Unified Ignition (DUI) in TN. A little more expensive but well worth the reliability. Pertronix and Mallory both have good options also.
S UP !
1982 32 Sedan FB
1989 hrs
360's(rebuilt)-Edelbrocks, MSD
Raw water cooled
Norris Lake
Speedwell,TN.

Hyperjump
Member
Posts: 18
Joined: Sun Jun 26, 2016 4:40 am

Re: MY 1966 26 ft 327 fireball

Postby Hyperjump » Sat Jun 02, 2018 4:51 pm

Thanks barefoot99. Will check it out.
:D HYPERJUMP :D
1966 26 Ft Express
Saybrook , Ohio
Lake Erie

ThunderStruck
Member
Posts: 16
Joined: Sun Jan 28, 2018 7:00 pm

Re: MY 1966 26 ft 327 fireball

Postby ThunderStruck » Sat Jun 02, 2018 6:52 pm

BEAUTIFUL !!!!!!!

EWRice
Royal Aluminum Star
Posts: 229
Joined: Thu Feb 04, 2016 12:37 pm

Re: MY 1966 26 ft 327 fireball

Postby EWRice » Sat Jun 02, 2018 8:05 pm

Being that yours is flywheel forward there are two different water pumps. The impellers are the same (and same as the chryslers) but the actual pump casting is different from LH to RH rotation. I do have a few pumps but would need to know your engine rotation.

Over their production, the rambler based graymarine engines used many different distributors. My '64 book lists 16 different distributors by 3 manufacturers: delco, mallory and auto-lite. Every one I have seen used a delco or auto-lite. The easiest way to get electronic ignition would be with the pertronix kit. I don't believe anyone makes an electronic distributor for these. They are different from the automotive distributors. Especially if the engine is reverse rotation. There should be a tag on the side of the dist. with the part number.
Muskegon Lake
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson

Hyperjump
Member
Posts: 18
Joined: Sun Jun 26, 2016 4:40 am

Re: MY 1966 26 ft 327 fireball

Postby Hyperjump » Wed Jun 13, 2018 7:59 am

Had mechanic look at pump , says just change out impeller. Says it looked ok but changing anyway. EWRice ill see which rotation i have and will get back to you. Thanks. No for For ignition , still checking out options. On a different note. Are 9x 12 tabs to small for my 26ft big M. or should I go 12 x 18..Most specs say 9 x 12 are recommended. Bigger would be better or no..Just like to see what others are running. Also Any good canvas guys in North East Ohio that members suggest. Mentor to Conneaut Ohio.
:D HYPERJUMP :D
1966 26 Ft Express
Saybrook , Ohio
Lake Erie

Fastjeff
Site Admin
Posts: 919
Joined: Sat Jul 12, 2014 5:06 am
Location: Rock Halll, MD
Contact:

Re: MY 1966 26 ft 327 fireball

Postby Fastjeff » Thu Jun 14, 2018 6:56 am

Bigger tabs are MUCH better. Smaller ones tend to drag more and kill speed. I have giant tabs on my tiny, 12 foot speed boat.

Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington