Throttle and shift lever handles

Things that are of general interest.
User avatar
ronmar
Member
Posts: 17
Joined: Mon Jul 17, 2017 1:54 pm

Throttle and shift lever handles

Postby ronmar » Wed Aug 09, 2017 11:52 pm

I have Morse shift and throttle top mount controls that red and black handles were damaged during transport. Shift and throttles working fine but handles and bolts were damaged. Anyone know where I can find replacements? Need 2 red and 2 black handles with hardware.
1990 Marinette 32 Sedan
Marty D
Port of Cincinnati

honestcharlie56
Royal Aluminum Star
Posts: 221
Joined: Tue Jul 19, 2016 8:27 pm

Re: Throttle and shift lever handles

Postby honestcharlie56 » Thu Aug 10, 2017 8:28 pm

I have a 1990 32' as well. Have you ever seen a marinette with controls like these installed?

https://images.jamestowndistributors.co ... 4819-1.jpg

I think they would look much much better. Its one of the few things I don't like about my boat......the originals are very 80's.
1990 Marinette 32 Sedan Flybridge "Hubba"
Twin Chrysler 318's

Fastjeff
Site Admin
Posts: 859
Joined: Sat Jul 12, 2014 5:06 am

Re: Throttle and shift lever handles

Postby Fastjeff » Fri Aug 11, 2017 7:09 am

Sorry, but when I moved last year I threw away an entire set of those.

Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington

User avatar
ronmar
Member
Posts: 17
Joined: Mon Jul 17, 2017 1:54 pm

Re: Throttle and shift lever handles

Postby ronmar » Sat Aug 12, 2017 9:17 am

honestcharlie56 wrote:I have a 1990 32' as well. Have you ever seen a marinette with controls like these installed?

https://images.jamestowndistributors.co ... 4819-1.jpg

I think they would look much much better. Its one of the few things I don't like about my boat......the originals are very 80's.


The newer design do look nice. Nothing wrong with my controls other than losing the handles. Will upgrade one day but trying to save $$ if can locate source for the handles.
Thanks
1990 Marinette 32 Sedan
Marty D
Port of Cincinnati

User avatar
ronmar
Member
Posts: 17
Joined: Mon Jul 17, 2017 1:54 pm

Re: Throttle and shift lever handles

Postby ronmar » Sat Aug 12, 2017 9:18 am

Fastjeff wrote:Sorry, but when I moved last year I threw away an entire set of those.

Jeff

Bummer :(
1990 Marinette 32 Sedan
Marty D
Port of Cincinnati

MetalHead
Site Admin
Posts: 198
Joined: Fri Jul 11, 2014 6:03 pm

Re: Throttle and shift lever handles

Postby MetalHead » Sat Aug 12, 2017 4:12 pm

My 63 has those Morse controls. You just need the knobs?
Attachments
2011-11-02_15-40-28_719.jpg
1959 Family Cruiser - Sold - Gary Dick - 12/05/14
1963 Express 31x10 - Sold - Joe & Ginger Tabor - 01/21/2017
1963 Express 31x8.5 - In Dry Dock - Restore Underway
1987 Sportsman - On Rolling Slip - Ready To Go !!!
Big BigM 's Rule !!!
Columbiana, AL

MetalHead
Site Admin
Posts: 198
Joined: Fri Jul 11, 2014 6:03 pm

Re: Throttle and shift lever handles

Postby MetalHead » Sat Aug 12, 2017 4:17 pm

1959 Family Cruiser - Sold - Gary Dick - 12/05/14
1963 Express 31x10 - Sold - Joe & Ginger Tabor - 01/21/2017
1963 Express 31x8.5 - In Dry Dock - Restore Underway
1987 Sportsman - On Rolling Slip - Ready To Go !!!
Big BigM 's Rule !!!
Columbiana, AL

User avatar
ronmar
Member
Posts: 17
Joined: Mon Jul 17, 2017 1:54 pm

Re: Throttle and shift lever handles

Postby ronmar » Tue Aug 15, 2017 12:49 pm

Thanks, These are a different style. Mine are not the round ball style rather are the ones forming a 90 degree angle held on with a single screw running through handle and through shift lever and same for throttle levers. I would post a pic but can't seem to be able to load images.
1990 Marinette 32 Sedan
Marty D
Port of Cincinnati