Shorepower, transfer switch & genny

Corrosion, Paint, Through Hulls, etc.
User avatar
shade2u2
Royal Aluminum Star
Posts: 286
Joined: Mon Jul 21, 2014 3:11 pm
Location: Marietta, Ohio -mile marker 172

Re: Shorepower, transfer switch & genny

Postby shade2u2 » Mon Mar 23, 2020 9:06 am

barefoot99 wrote:John, glad you found part of the issue.Those gremlins are the worst . Took me 2 months to figure one out and wound up rewiring the entire panel as you mentioned. I had to add a separate selection switch for each feed and checked each common and ground wire with an elec meter when I put it back together.
I ditched the auto transfer switch all together. Safe Harbors, Scott


I may ditch the automatic switch and go to a 2nd Blue Seas switch unless I surprise myself or get a little better information from the switch manufacturer. It is pretty new and I think it is a good unit. I probably comes down to the grounding.
John
1986 39 Sedan w/Crusader 454 & 1.92 drive.
former - '84 28 Express Hardtop w/single 360 1.5:1 drive (SOLD - now in Uruguay)
Ohio and Muskingum Rivers (Marietta, OH)