I removed my rudders from my 1990 32 Sedan to have the steel upgraded to stainless.
The shafts are bent- both appear the same. Is this correct, or did I hit something (they have operated fine)? I hope you ca see in the pix:
Anyone know?
Thanks,
Bud
Bent Rudder shafts?
Bent Rudder shafts?
Bud
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland
Re: Bent Rudder shafts?
Hello Bud.
On my 32' and 37" the shafts are straight. Both 1975 boats.
Hope this helps.
Stainless is a great way to go.
bill
ps When you get a chance how about adding a signature to your posts:
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
Re: Bent Rudder shafts?
Bill, I don’t think why my signature is not showing up. I have checked both the boxes to do so.
Bud
Bud
Bud
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland
Re: Bent Rudder shafts?
Hah! I updated all the settings. Looks like it works now!
Bud
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland
-
- Royal Aluminum Star
- Posts: 266
- Joined: Mon Jan 19, 2015 11:07 pm
- Location: Lake Superior-Michigan's U.P.
Re: Bent Rudder shafts?
Shafts are supposed to be straight.
Rodney
1975 28 Express-Twin 350 Chevy's, SOLD
1990 32 Express--Twin Mercruiser 454 with Bravo I outdrives
Portage Canal Waterway-Upper Peninsula,Lake Superior
1975 28 Express-Twin 350 Chevy's, SOLD
1990 32 Express--Twin Mercruiser 454 with Bravo I outdrives
Portage Canal Waterway-Upper Peninsula,Lake Superior
Re: Bent Rudder shafts?
Thanks Rodney!
Bud
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland
Re: Bent Rudder shafts?
It goes without saying but be sure to duplicate the shape of those rudders close as you can.
A lot of engineering goes into those to make the steering (which if excellent on Marinettes) work that well.
Jeff
A lot of engineering goes into those to make the steering (which if excellent on Marinettes) work that well.
Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington
Re: Bent Rudder shafts?
Thanks Jeff, Do you agree that those shafts should be straight?
Bud
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland
Re: Bent Rudder shafts?
I found a few pix of my former boat's bottom and, while the angle I observed isn't really great, it doesn't seem to show a bend in the shaft. How both of yours would be bent is rather mysterious especially since you don't recall hitting anything.
I do recall that the blades were pointed a bit off center for a reason (to improve steering, I think) but I could be imaging that. It's been a while since I boated.
Jeff?
I do recall that the blades were pointed a bit off center for a reason (to improve steering, I think) but I could be imaging that. It's been a while since I boated.
Jeff?
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
Re: Bent Rudder shafts?
Thanks Joel!
Bud
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland
1990 Marinette 32 Sedan “Mostly Harmless”
Twin Chrysler 360s RWC
Westerbeke 6.5 KW
Beard’s Creek, South River,
Chesapeake Bay, Maryland