window hardware
window hardware
Hi everybody I was wondering if someone has a source for the hardware for opening and closing of the lower helm windows. Thx Harry.
1987 32 f/b sedan with twin 318's Docked on florida's nature coast
Re: window hardware
it's a tricky little piece to replace but I have a cheap alternative: Cut, trim, sand, stain, a small block of wood. Say, 1" x 3" or so. About 1/4 to 1/2 " thick and silicone glue to window. It will give the needed finger hold.
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
Re: window hardware
Are you talking about sliding windows? I have those on the sides of my cabin. I bought 2 in diameter glass discs from a lab supply and applied them with silicone. Works great. They are about 1/4 thick.
1971 32ft Express 2x318
Seneca Lake, Erie Canal, Lake Ontario, Rideau
Seneca Lake, Erie Canal, Lake Ontario, Rideau
Re: window hardware
Thanks for the replies. I'm talking about the forward looking windows that have a rod and sliding adjuster that has a locking knob. Parts of mine are in poor shape and need replaced. Thx.
1987 32 f/b sedan with twin 318's Docked on florida's nature coast
Re: window hardware
You mean this:
https://www.boatoutfitters.com/windshield-adjuster
8" seems pretty short though. This outfit seems to have other sizes, but none longer than 8" in stock:
https://www.fisheriessupply.com/perko-f ... 1116dp1chr
You might try these folks--I've never been there but the place looks like a boater's dream: http://marine-sales.com/contact.html
Good luck.
https://www.boatoutfitters.com/windshield-adjuster
8" seems pretty short though. This outfit seems to have other sizes, but none longer than 8" in stock:
https://www.fisheriessupply.com/perko-f ... 1116dp1chr
You might try these folks--I've never been there but the place looks like a boater's dream: http://marine-sales.com/contact.html
Good luck.
Joe Napoli
1977 28' Express
Twin raw water cooled 318s
Beaver River--near mile 25 on the Ohio
1977 28' Express
Twin raw water cooled 318s
Beaver River--near mile 25 on the Ohio
Re: window hardware
Thanks Rockit those are indeed the style I need just not quite big enough.I think for now I'll just take it apart and re-tap the sliding lock to a slightly larger set screw and and live with the corrosion on the stanchions, thx Harry.
1987 32 f/b sedan with twin 318's Docked on florida's nature coast