Page 1 of 1
Hull Plating thickness
Posted: Mon Mar 23, 2015 9:11 pm
by Maestro
I don't have any manuals or brochures for my boat...anyone know the bottom plate/side plate thickness on a 1970 28' express?
I know these thicknesses changed slightly over the years. Thanks...
Re: Hull Plating thickness
Posted: Mon Mar 23, 2015 9:58 pm
by GB49
I have a plug from a transducer install on a 1989 28' Fisherman. It appears to 5/32" - 3/16". I don't have proper mic to check.
Re: Hull Plating thickness
Posted: Tue Mar 24, 2015 4:43 pm
by jralbert
P 14 of the owners manual says the bottom plating for 28'/32' boats is 5/32nds. For 37' boats it's 3/16ths. Best I can make out (the scan was somewhat fuzzy), side/top plating is 1/8th. The manual was from a 1988 32' (my former) boat. Hope that helps/