Page 1 of 1
Capac really dirty
Posted: Mon Apr 06, 2015 7:52 pm
by Maestro
Re: Capac really dirty
Posted: Tue Apr 07, 2015 8:31 am
by Roger2
Leave it alone, its fine
Roger
Re: Capac really dirty
Posted: Tue Apr 07, 2015 2:41 pm
by jralbert
The only thing I ever used on the inner-most part of the Capac sensor (that's the 3" or 4" circle in the middle that should never be painted = the larger outer portion of the mounting may be painted) was some dish soap on a soft wet towel. The silver chloride coating on the sensor is quite thin and if you damage it, the Capac is Caput. I cannot recall whether cleaning it (gently) ever made a difference in the reading.