Page 1 of 1
impeller parts flush?
Posted: Mon Aug 10, 2015 10:27 am
by ddependo
Have a duel pocket pump on 318 that both impeller are missing parts,
How do I get out the missing pieces? Looked in thermostat housing & saw nothing.
Thanks, Wayne
Re: impeller parts flush?
Posted: Mon Aug 10, 2015 2:47 pm
by jralbert
One of the more frequently mentioned places for trapped impeller pieces is the oil cooler. And, heat exchanger.
Re: impeller parts flush?
Posted: Tue Aug 11, 2015 10:44 am
by barkleydave
I had one where there was a 90 degree fitting on the outlet side. (Not a M) spent weeks searching found the piece stuck in the 90 elbow!
Dooooh!
dave
Re: impeller parts flush?
Posted: Tue Aug 11, 2015 9:21 pm
by Roger2
If there is a place to get to and hook up water hose & back flush. a good way to get most parts out.
Roger
Re: impeller parts flush?
Posted: Wed Aug 12, 2015 7:18 am
by ddependo
Thanks for the suggestions. will try them all.
W