A soft (non abrasive) sponge with some dish soap should do the trick.Maestro wrote: the outer silver chloride surface is very dirty. I have been advised not to scrub at it. Basically keeping my fingers crossed that it stays working. I have checked it with a multimeter and it does read correctly despite the grime.
capac sensor
Re: capac sensor
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
Re: capac sensor
The cost directly from Siemens was less expensive than through the Florida vendor. I replaced both the thru hull sensor and the gauge. cost then was $360.
Re: capac sensor
Anyone have a line on a thru hull sensor replacement for Capac? There’s a guy on FB looking.
Thanks
Thanks
John
1991 41 Marquis Convertible "Running on Water"
454 Crusaders
1991 41 Marquis Convertible "Running on Water"
454 Crusaders
Re: capac sensor
Never mind. The guy I was trying to help found a source
John
1991 41 Marquis Convertible "Running on Water"
454 Crusaders
1991 41 Marquis Convertible "Running on Water"
454 Crusaders