YouTube Video Series Aluminum Strut Fabrication
Posted: Fri Sep 30, 2016 10:38 pm
I just finished watching a series of videos on YouTube of a machinist fabricating an aluminum strut for a boat. It looks like the strut would fit a 37', 39' or 41' Marinette. I thought it was very interesting.
In the last video he installed a bronze cutlass bearing with tef gel.. I would have put a phenolic bearing back in the strut.
10 Degrees Off The STBD Side Part One
https://youtu.be/_wRF5fYDG4Y
In the last video he installed a bronze cutlass bearing with tef gel.. I would have put a phenolic bearing back in the strut.
10 Degrees Off The STBD Side Part One
https://youtu.be/_wRF5fYDG4Y