360 Chrysler running like crap cont...

Engines, Shafts, Steering, Struts, Rudders, etc.
railrunner04
Tin star
Posts: 33
Joined: Sun May 03, 2015 5:40 pm

Re: 360 Chrysler running like crap cont...

Postby railrunner04 » Sun Jun 18, 2017 1:37 pm

Amazing something so small could be such a pain in the a** glad shes finally back to normal!
Moby Rick
FYC grosse ile mich
32ft F/B express
1971
T/318 Chrysler marine

User avatar
bill
Royal Aluminum Star
Posts: 380
Joined: Sat Jul 12, 2014 7:17 am
Location: Grosse Ile MI

Re: 360 Chrysler running like crap cont...

Postby bill » Tue Jun 27, 2017 8:19 am

BigM
So it continues.
Went to the Detroit fireworks last night.
Can't believe it started to rain when fireworks started and stopped when fireworks show was over. :o
Boat ran flawlessly all the way up and a little more than half way home. We were downbound in the Livingstone Channel and Mr. Port decided it was time for a break. :shock: Would not go above 1500 rpm. :? Got to Frenchman's Creek and decided to go in on the starboard engine and save the port for docking.
I think we broke out the champagne a little to early. :lol:
Anyway back to reading early posts in this very long post. :oops:
bill
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired

Third Owner bill

jralbert
Site Admin
Posts: 394
Joined: Fri Jul 11, 2014 9:15 pm

Re: 360 Chrysler running like crap cont...

Postby jralbert » Tue Jun 27, 2017 12:06 pm

My standard advice when one encounters symptoms you reported: Check the filter (usually cg-11) at the point where the fuel line enters the carb. It historically causes what you ran into
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD


Return to “Drivetrain”

Who is online

Users browsing this forum: No registered users and 1 guest