logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Kicker Remote Controls
Options View
Previous Topic Next Topic
DiverDennis
#1 Posted : Friday, December 11, 2009 9:40:26 PM(UTC)
DiverDennis

Rank: Marinette Royal Aluminum Poster (300+) posts

Groups: Member
Joined: 12/10/2007(UTC)
Posts: 612
Points: 1,739

Thanks: 5 times
Was thanked: 5 time(s) in 4 post(s)
Hello all,

I've been workin' on kicker motor remote steering stuff:
>Mounted an UltraFlex 132-OBS side mount hydraulic cylinder
>Made steering link from 3/8" SS all-thread and got the heim joint from McMaster-Carr
>Ordered 2 hydraulic control valves (Hydraforce SV08-20M w/manual override)
>In the process of hooking up hoses and controls
Here is the hydraulic steering project post.

Also ran 2 cables for remote start, stop, tilt and mounted the control switches in the vacant holes on the shore power breaker panel. And while I had everything torn apart, decided to put a AC current and a DC volts meter (kicker) there too.

ALMOST DONE…
DiverDennis attached the following image(s):
DiverDennis attached the following image(s): IMG_4451.JPG
DiverDennis attached the following image(s): IMG_4456.JPG
DiverDennis attached the following image(s): IMG_4454.JPG
DiverDennis attached the following image(s): IMG_4452.JPG
Surface Interval
1975 28' Express, Single Chrysler M360 ('87), Raymarine E120 MFD, HD digital sonar, GPS, 4KW radome, Sirius satellite weather,
X-10 autopilot with ST70 controller, Yahama 15HP 4 stroke electric start and tilt with hyd steering & remote throttle control,
Floscan 9000, ACR Sat2 406 EPIRB, 24 volt stern thruster, Interlux Brightside paint ('06-'08) Trilux 33 on bottom,
Big Jon electric downriggers, Fish Hawk X4, Traxtech swivel mounts, Bert's track and ratchet holders.
Click here for all the equipment details and here for the complete photo album.
Back to top
 |  Edit by user
Sponsor
Please Register : To weed out spammers, new members may not post until approved. An email is usually sent after approval. This forum is for Marinette Owners and other aluminum boat boaters who wish to share boating information. Aluminum Roamer owners are also welcome. (Do not post content you do not have the right to post and mass (robots) posters are unwelcome. We also have a marine electronics page and lots of Chrysler Engine info. State by what permission you copy content and give credit properly.) The site is now fixed with some more Chrysler information. We have space for pictures on the new location. Use shinkpic to autochange size http://www.onthegosoft.com/sp_download.htm

Great Sites - http://www.marinette.com Marinette Company

http://web.me.com/dougmrose/Doug_Roses_Website/Welcome.html

http://fastjeff.tripod.com/ Repair Tricks and Techniques for Marinettes

http://www.greatlakesmarinetteclub.com/

PLEASE post in the appropriate folder. Please, do not post your actual email address in publicly readable websites. The first rule is be a class act.
Back to top  
mark klusman
#2 Posted : Saturday, December 12, 2009 12:04:29 AM(UTC)
mark klusman

Rank: Marinette Royal Aluminum Poster (300+) posts

Groups: Member
Joined: 10/19/2009(UTC)
Posts: 314
Points: -74

Thanks: 12 times
Was thanked: 6 time(s) in 6 post(s)
Dennis,
Looks like you got your project well in hand.
I have a question about the ( shore power breaker panel ). Is it original to your Marinette ? Sure like it.

T.N.X. Mark
trash66
No matter where you go,there you are.
Knot Normal
28FT. Express
Twin 318's
Ten Mile Tn.




Back to top
fastjeff
#4 Posted : Saturday, December 12, 2009 2:06:04 AM(UTC)
fastjeff

Rank: Administration

Medals: aluminum star: For Marinette Owners Everywhere above the call of duty

Groups: Admin2, Admin2, Admin, Administration, Member
Joined: 12/5/2007(UTC)
Posts: 3,120
Points: 5,693

Was thanked: 30 time(s) in 27 post(s)
Did you once work for NASA?

Jeff (former rocket scientist)
"...reality is not nearly as lovely as the world of Liberal Land. No wonder so many people want to go there." - Tom Sowell
Back to top
DiverDennis
#3 Posted : Sunday, December 13, 2009 4:55:20 AM(UTC)
DiverDennis

Rank: Marinette Royal Aluminum Poster (300+) posts

Groups: Member
Joined: 12/10/2007(UTC)
Posts: 612
Points: 1,739

Thanks: 5 times
Was thanked: 5 time(s) in 4 post(s)
mark klusman wrote:
I have a question about the ( shore power breaker panel ). Is it original to your Marinette? Sure like it.
Yes, it is original. The name plate above the panel was a Christmas gift from the Admiral. She found a blank BigM plate on eBay and had it engraved. Thanks Beth!
DiverDennis attached the following image(s):
DiverDennis attached the following image(s): name plate small.JPG
Surface Interval
1975 28' Express, Single Chrysler M360 ('87), Raymarine E120 MFD, HD digital sonar, GPS, 4KW radome, Sirius satellite weather,
X-10 autopilot with ST70 controller, Yahama 15HP 4 stroke electric start and tilt with hyd steering & remote throttle control,
Floscan 9000, ACR Sat2 406 EPIRB, 24 volt stern thruster, Interlux Brightside paint ('06-'08) Trilux 33 on bottom,
Big Jon electric downriggers, Fish Hawk X4, Traxtech swivel mounts, Bert's track and ratchet holders.
Click here for all the equipment details and here for the complete photo album.
Back to top
 |  Edit by user
DiverDennis
#5 Posted : Monday, December 21, 2009 9:54:04 PM(UTC)
DiverDennis

Rank: Marinette Royal Aluminum Poster (300+) posts

Groups: Member
Joined: 12/10/2007(UTC)
Posts: 612
Points: 1,739

Thanks: 5 times
Was thanked: 5 time(s) in 4 post(s)
What do you think?
DiverDennis attached the following image(s):
DiverDennis attached the following image(s): IMG_4477.JPG
DiverDennis attached the following image(s): IMG_4478.JPG
Surface Interval
1975 28' Express, Single Chrysler M360 ('87), Raymarine E120 MFD, HD digital sonar, GPS, 4KW radome, Sirius satellite weather,
X-10 autopilot with ST70 controller, Yahama 15HP 4 stroke electric start and tilt with hyd steering & remote throttle control,
Floscan 9000, ACR Sat2 406 EPIRB, 24 volt stern thruster, Interlux Brightside paint ('06-'08) Trilux 33 on bottom,
Big Jon electric downriggers, Fish Hawk X4, Traxtech swivel mounts, Bert's track and ratchet holders.
Click here for all the equipment details and here for the complete photo album.
Back to top
Docsnow
#6 Posted : Monday, December 21, 2009 9:58:40 PM(UTC)
Docsnow

Rank: Marinette Royal Aluminum Poster (300+) posts

Groups: Admin, Administration
Joined: 12/4/2007(UTC)
Posts: 1,868
Points: 4,238

Thanks: 2 times
Was thanked: 27 time(s) in 27 post(s)
BRAVO !!!Applause
http://www.picturetrail.com/gid23690601 Try it now there's music to listen to while U view the Big M's

http://www.PictureTrail..../index.php?clubID=20726 this one for the Pix club


 You'll have bad times, but they'll just wake you up to the good times you weren't paying attention to

Some people try to turn back their odometers.Not me, I want people to know "why" I look this way.I've traveled a long way and some of the roads weren't paved.
Back to top
Jazman
#7 Posted : Tuesday, December 22, 2009 3:08:57 AM(UTC)
Jazman

Rank: Top Rank Aluminum Star

Groups: Member
Joined: 12/21/2008(UTC)
Posts: 116
Points: 243
Hey Dennis, Looks Great! What is that unit to the left side with the rotary knob on it?
Bill

1975 37' FB Sedan
Sleepless Knights
Bohemia River
Chesapeake City, MD
Back to top
DiverDennis
#8 Posted : Tuesday, December 22, 2009 3:14:38 AM(UTC)
DiverDennis

Rank: Marinette Royal Aluminum Poster (300+) posts

Groups: Member
Joined: 12/10/2007(UTC)
Posts: 612
Points: 1,739

Thanks: 5 times
Was thanked: 5 time(s) in 4 post(s)
That is the kicker's remote throttle control made by Magma Inc.
The ConTrollKing is what every serious fisherman needs to improve their success rate. ConTrollKing is designed to compliment any of the remote steering systems that are available to the avid fisherman. The installation is designed so as not to interfere with your motor's normal, manual throttle control. You will have your choice of adjusting your motor speed using either manual controls or the ConTrollKing. With ConTrollKing installed on your gasoline trolling motor, you can adjust your trolling speed to obtain that ideal lure action necessary to catch fish while others watch.
Surface Interval
1975 28' Express, Single Chrysler M360 ('87), Raymarine E120 MFD, HD digital sonar, GPS, 4KW radome, Sirius satellite weather,
X-10 autopilot with ST70 controller, Yahama 15HP 4 stroke electric start and tilt with hyd steering & remote throttle control,
Floscan 9000, ACR Sat2 406 EPIRB, 24 volt stern thruster, Interlux Brightside paint ('06-'08) Trilux 33 on bottom,
Big Jon electric downriggers, Fish Hawk X4, Traxtech swivel mounts, Bert's track and ratchet holders.
Click here for all the equipment details and here for the complete photo album.
Back to top
Jazman
#9 Posted : Tuesday, December 22, 2009 3:22:26 AM(UTC)
Jazman

Rank: Top Rank Aluminum Star

Groups: Member
Joined: 12/21/2008(UTC)
Posts: 116
Points: 243
Got Ya, Cool Thanks
Bill

1975 37' FB Sedan
Sleepless Knights
Bohemia River
Chesapeake City, MD
Back to top
DiverDennis
#10 Posted : Wednesday, February 03, 2010 9:06:09 PM(UTC)
DiverDennis

Rank: Marinette Royal Aluminum Poster (300+) posts

Groups: Member
Joined: 12/10/2007(UTC)
Posts: 612
Points: 1,739

Thanks: 5 times
Was thanked: 5 time(s) in 4 post(s)
bump Whistle
Surface Interval
1975 28' Express, Single Chrysler M360 ('87), Raymarine E120 MFD, HD digital sonar, GPS, 4KW radome, Sirius satellite weather,
X-10 autopilot with ST70 controller, Yahama 15HP 4 stroke electric start and tilt with hyd steering & remote throttle control,
Floscan 9000, ACR Sat2 406 EPIRB, 24 volt stern thruster, Interlux Brightside paint ('06-'08) Trilux 33 on bottom,
Big Jon electric downriggers, Fish Hawk X4, Traxtech swivel mounts, Bert's track and ratchet holders.
Click here for all the equipment details and here for the complete photo album.
Back to top
Users browsing this topic
guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF 1.9.5.5 | YAF © 2003-2011, Yet Another Forum.NET
This page was generated in 0.246 seconds.