There's a thread in another section of the forum wondering how to adapt a 1" prop shaft to accept a prop designed for a 1 1/4" shaft. Here's a summary:
-- I have a 76 with twin 360's. The proper size prop is 14/11 cupped. I bought two spares, but learned that they were for 1 1/4 in shafts where i think mine are 1 inch. Is there something I can put on the shaft so these will work, or am i out of luck. Mike on Ohio
-- you can buy a nylon spacer to fix that since your shafts are 1 inch. Fastjeff
-- you can. I am running one on my boat.don't forget the special step key. They make them in brass to ,but i was told the nylon work better.so that's what I have and its working good. Tim
THE SOURCE:--They sell them at
www.henrysmith.com When at their home page in upper left side click on Products & Services then scroll down to Reducer Bushing. Norm
Joel Albert, Potomac MD
"Charlie B" - 1988 32' FBS
Twin 318's/FWC/16x15 nibral props
docked Deale, MD
