Rank: Upper Crust Bronze Star
Groups: Member
Joined: 7/27/2008(UTC)
Posts: 131
Points: 117
Was thanked: 1 time(s) in 1 post(s)
|
if anyone is looking to buy a nice 39 thats equipped and priced right steve donock in mt vernon va has just bought a 51 ft chris craft and is just wanting to get out of his 1985 39 aft cabin i saw and its a real good deal priced at 39900 his cell # is 703-517-2379 and here is a link to yacht world http://www.yachtworld.co...Vernon/VA/United-States
|
|
|
|
|
|
Please Register : To weed out spammers, new members may not post until approved. An email is usually sent after approval.
This forum is for Marinette Owners and other aluminum boat boaters who wish to share boating information. Aluminum Roamer owners are also welcome. (Do not post content you do not have the right to post and mass (robots) posters are unwelcome. We also have a marine electronics page and lots of Chrysler Engine info. State by what permission you copy content and give credit properly.) The site is now fixed with some more Chrysler information. We have space for pictures on the new location. Use shinkpic to autochange size http://www.onthegosoft.com/sp_download.htm
Great Sites - http://www.marinette.com Marinette Company
http://web.me.com/dougmrose/Doug_Roses_Website/Welcome.html
http://fastjeff.tripod.com/ Repair Tricks and Techniques for Marinettes
http://www.greatlakesmarinetteclub.com/
PLEASE post in the appropriate folder. Please, do not post your actual email address in publicly readable websites.
The first rule is be a class act.
|
|
|
Rank: Dedicated Tin Star
Groups: Member
Joined: 8/12/2008(UTC)
Posts: 78
Points: 105
|
I looked at this boat last week..It has not been out of the water in some time.
Needs paint,several minor repairs, and hatches are very soft.
The boat is winterized so the owner could not start her up.
She is not bad but alot of time needed and haul .
Owner has 2 boats and is in a hurry to sell this one..?
|
|
|
|
|
|
Rank: New Poster
Groups: Member
Joined: 1/13/2009(UTC)
Posts: 2
Points: 6
|
Hi - I'm the owner of the 39 you're talking about. Question for you on the hatches. You say "soft". Can you explain what you mean? The only hatch is on the foredeck and it's tight as a drum. Also, you mention needing paint. I hope you mean bottom paint (by the way I have a full set of new zincs ready for the new owner) since the entire boat was painted from the waterline to the flybridge in 2002. She still shines like new. Except for some touch up needed around stancions - painter did not prep them properly, and I even have the paint - the finish is very, very good.
If anyone has questions on her or would like to see her please let me know. The boat will be dewinterized this weekend, has a FULL tank of stablized gas, and has been reduced to $35,000.
Happy Boating Season!
Steve
|
|
|
|
|
|
Rank: Marinette Royal Aluminum Poster (300+) posts
Groups: Member
Joined: 12/4/2007(UTC)
Posts: 685
Points: 1,824
Thanks: 5 times
Was thanked: 14 time(s) in 12 post(s)
|
I too am curious about the hatches being soft. Perhaps Gypsy has mistaken for a non-aft cabin boat? 1986, 32' Sedan, twin 360ci, 275hp Chrysler's w/ K&N flame arrestors
|
|
|
|
|
|
Rank: New Poster
Groups: Member
Joined: 1/13/2009(UTC)
Posts: 2
Points: 6
|
It occurred to me earlier today that perhaps Gypsy is referring to the salon sole as hatches – engine hatches. If that’s the case all I can note is that the design of the sole may tend to make it seem “soft”. All the sole consists of is three pieces of hinged plywood with very little support. The wood is indeed fine but you do have about a 3 – 4 foot run of unsupported sole. I’ve been aboard several 39s over the years and they’ve all felt that same underfoot. Heck makes it feel like a boat!
Anyway, I hope this addresses Gypsy’s question if indeed it was my boat he was aboard.
Steve
70 degrees today – time for a boat ride!
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
