logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Engelhard corrosion Monitor
Options View
Previous Topic Next Topic
boyermike
#1 Posted : Monday, March 14, 2011 8:37:20 AM(UTC)
Rank: New Poster

Groups: Member
Joined: 2/7/2011(UTC)
Posts: 4
Points: 12

Thanks: 1 times
Could anyone explain The proper use of the Engelhard corrosion system. The control switch has two detents as it is pulled out?? The web says that the company was bought out by US Filters, which is now owned by Siemens. Neither company will give advice on my unit. I also read that they should be removed from Aluminum boats - due to owners not understanding how to properly use the system. The say too much voltage is bad and too little no good. How can one use the system properly with so little info available? Thanks
Back to top
 |  Edit by user
Sponsor
Please Register : To weed out spammers, new members may not post until approved. An email is usually sent after approval. This forum is for Marinette Owners and other aluminum boat boaters who wish to share boating information. Aluminum Roamer owners are also welcome. (Do not post content you do not have the right to post and mass (robots) posters are unwelcome. We also have a marine electronics page and lots of Chrysler Engine info. State by what permission you copy content and give credit properly.) The site is now fixed with some more Chrysler information. We have space for pictures on the new location. Use shinkpic to autochange size http://www.onthegosoft.com/sp_download.htm

Great Sites - http://www.marinette.com Marinette Company

http://web.me.com/dougmrose/Doug_Roses_Website/Welcome.html

http://fastjeff.tripod.com/ Repair Tricks and Techniques for Marinettes

http://www.greatlakesmarinetteclub.com/

PLEASE post in the appropriate folder. Please, do not post your actual email address in publicly readable websites. The first rule is be a class act.
Back to top  
fastjeff
#2 Posted : Monday, March 14, 2011 2:08:06 PM(UTC)
fastjeff

Rank: Administration

Medals: aluminum star: For Marinette Owners Everywhere above the call of duty

Groups: Admin2, Admin2, Admin, Administration, Member
Joined: 12/5/2007(UTC)
Posts: 3,133
Points: 5,732

Was thanked: 34 time(s) in 30 post(s)
Sounds like the Mercathode system. You can still monitor the CAPAC meter to see if you're in the proper range. And, yes, too much voltage generated by this unit (or anodes) is not good--it leaches out magnesium from the welds.

Jeff
"...reality is not nearly as lovely as the world of Liberal Land. No wonder so many people want to go there." - Tom Sowell
Back to top
Users browsing this topic
guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF 1.9.5.5 | YAF © 2003-2011, Yet Another Forum.NET
This page was generated in 0.050 seconds.