Rank: Fiberglass Star Advanced Member
Groups: Member2
Joined: 11/30/2011(UTC)
Posts: 30
Points: 90
Was thanked: 3 time(s) in 3 post(s)
|
I am needing the exhaust riser and 20 degree exhaust elbow and possible the main maniflod please contact me on this web site
|
|
|
|
|
|
Please Register : To weed out spammers, new members may not post until approved. An email is usually sent after approval.
This forum is for Marinette Owners and other aluminum boat boaters who wish to share boating information. Aluminum Roamer owners are also welcome. (Do not post content you do not have the right to post and mass (robots) posters are unwelcome. We also have a marine electronics page and lots of Chrysler Engine info. State by what permission you copy content and give credit properly.) The site is now fixed with some more Chrysler information. We have space for pictures on the new location. Use shinkpic to autochange size http://www.onthegosoft.com/sp_download.htm
Great Sites - http://www.marinette.com Marinette Company
http://web.me.com/dougmrose/Doug_Roses_Website/Welcome.html
http://fastjeff.tripod.com/ Repair Tricks and Techniques for Marinettes
http://www.greatlakesmarinetteclub.com/
PLEASE post in the appropriate folder. Please, do not post your actual email address in publicly readable websites.
The first rule is be a class act.
|
|
|
Rank: Administration
Groups: Admin2
Joined: 11/30/2011(UTC)
Posts: 57
Points: 180
Was thanked: 13 time(s) in 11 post(s)
|
E-Basic.com. Bring your wallet!
Jeff
|
|
|
|
|
|
Rank: Marinette Royal Aluminum Poster (300+) posts
Groups: Member
Joined: 10/25/2009(UTC)
Posts: 387
Points: 521
Thanks: 2 times
Was thanked: 3 time(s) in 3 post(s)
|
I have a commercial account and can get new ones for you at a good price. And just about any other marine supplies for that matter. I can get a quote for you Monday, let me know year and all the other pertinent facts, etc. They are still not going to be cheap, I'm sure. I might be able to scrounge up a couple used ones, but I still need all the facts. Thanks, Sean SIFF SURF
1972 32' FB Express
Twin 318s
|
|
|
|
|
|
Rank: Administration
Groups: Admin2
Joined: 11/30/2011(UTC)
Posts: 57
Points: 180
Was thanked: 13 time(s) in 11 post(s)
|
Don't use old manifolds--even I'm not THAT cheap! Too much work changing them out, and too much risk of a future water leak.
Jeff
|
|
|
|
|
|
Rank: Fiberglass Star Advanced Member
Groups: Member2
Joined: 11/30/2011(UTC)
Posts: 30
Points: 90
Was thanked: 3 time(s) in 3 post(s)
|
Sean I only have 2 manifolds completly disassembled, they both will need risers and 20 degree elbows so far I seen osco pieces for about $100 each + or - . I will atemp to take the next one apart tomorrow . I have recut the threads in the manifolds that are apart and pulled the tubes. been thinking of hot tanking them or maybe pouring some muratic acid in them. Most of the scale as been removed and they seem to have alot of life in them. Jeff I will be using my best stuff on the out sides and anything left over on the inboard side. Thank you for your advice and help.
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
