Welcome Guest Search | Active Topics | Members | Log In | Register

Part type for NMEA 2000 (Maretron) Receptacle Options · View
marinettejoe
Posted: Wednesday, March 12, 2008 5:04:47 PM

Rank: Administration
Groups: Administration , Member, Other Mods

Joined: 12/3/2007
Posts: 239
Points: 200
Location: Stafford
Part type for NMEA 2000 (Maretron),

I am seeking a good source and the part type for NMEA2000 Maretron type receptacles. I think this is a 5 pin size 14s screw type 97, but I don'tknow. Anyone know?



Unzinced ships sink at slips.
Sponsor
Posted: Wednesday, March 12, 2008 5:04:47 PM
Please Register : New members may not post until approved. An email is sent after approval. We do this to reduce those who use these forums for spamming. This forum is for Marinette Owners and other aluminum boat boaters who wish to share boating information. Aluminum Roamer owners are also welcome. (Do not post content you do not have the right to post and mass (robots) posters are unwelcome. We also have a marine electronics page and lots of Chrysler Engine info. State by what permission, you copy content and accredit properly.) The site is now fixed with some more Chrysler information. I will try to post more information soon. We have space for pictures on the new location. Use shinkpic to autochange size http://www.onthegosoft.com/sp_download.htm

Great Sites - http://www.marinette.com Marinette Company http://www.geocities.com/dougmrose/ Wiring Marinette http://fastjeff.tripod.com/ Repair Tricks and Techniques for Marinettes http://www.greatlakesmarinetteclub.com/

PLEASE post in the appropriate folder. Please, do not post your actual email address in publicly readable websites. The first rule is be a class act.

fpmurphy
Posted: Thursday, March 13, 2008 1:57:46 AM
Rank: Newbie
Groups: Member

Joined: 1/30/2008
Posts: 0
Points: 96
Location: Florida
What do you mean by "receptacle"? Do you mean a male or female panal mount connector?
marinettejoe
Posted: Friday, March 14, 2008 12:47:27 AM

Rank: Administration
Groups: Administration , Member, Other Mods

Joined: 12/3/2007
Posts: 239
Points: 200
Location: Stafford
fpmurphy wrote:
What do you mean by "receptacle"? Do you mean a male or female panal mount connector?


Actually both. Please.

Unzinced ships sink at slips.
fpmurphy
Posted: Friday, March 14, 2008 1:57:56 AM
Rank: Newbie
Groups: Member

Joined: 1/30/2008
Posts: 0
Points: 96
Location: Florida
Docsnow
Posted: Friday, March 14, 2008 5:10:45 AM

Rank: Top Rank Aluminum Star
Groups: Administration , Member

Joined: 12/4/2007
Posts: 1,311
Points: -1,496
Location: White Lake MI. or on my BOAT
FPM,
Thanks for the web site U have posted will have to give them a call to find out if they have a
adapter for a Furuno to Sea Tech auto pilot right now I’m only able to use 2 of the 6 wires that
come from the Furuno the Sea Tech has a 5 wire connecter. So I’ll be able to use the
DGPS/Plotter along with my GPS Plotter sounder ? Think

Norm,

BIGBigMs Live On Applause

Keep your hooks wet & your Butts dry also make sure your whistle stays wet
marinettejoe
Posted: Wednesday, March 19, 2008 6:44:17 PM

Rank: Administration
Groups: Administration , Member, Other Mods

Joined: 12/3/2007
Posts: 239
Points: 200
Location: Stafford
ConnectZone sells the LTW stuff when in stock at reasonable prices in small qtys. A Tip of the hat to Lance Wilder and fpmurphy. Stock had run out. LTW has a 500 piece minimum.... Nice people, but I had to go to Wesgarde.

I needed LTWMC-05PFFS-SH8001 the plug.

USA
Firm : ConnectZone
Address : ConnectZone
26601 79th Ave S Kent WA 98032
Tel : +1-253-859-0575 ext 204
Mobile Tel : 206-310-6549
Fax : +1-253-859-9101
Contact to : Mr. Lance Wilder
E-mail : ltw@connectzone.com
Website : www.connectzone.com



Unzinced ships sink at slips.
marinettejoe
Posted: Tuesday, April 01, 2008 12:43:48 PM

Rank: Administration
Groups: Administration , Member, Other Mods

Joined: 12/3/2007
Posts: 239
Points: 200
Location: Stafford
Wesgarde has the parts in small quantities with a $50 minimum. As the cost for each piece this means 5 pieces. Digikey, Mouser and Jameco do not carry this type of device net stuff. Molex 848649001 for Male and 848649004 for female

http://www.wesgarde.com 1800-554-8866 to order
http://www.wesgarde.com/Molex%20NMEA%20Part%20List%20Old%20New.xls

Unzinced ships sink at slips.
fpmurphy
Posted: Thursday, April 03, 2008 2:56:25 PM
Rank: Newbie
Groups: Member

Joined: 1/30/2008
Posts: 0
Points: 96
Location: Florida
Should have thought of these people before now ....

Pacer marine (www.pacermarine.com 1.800.424.9549) has devicenet Micro C/Euro C
bulkhead mount receptacles in stock

Part# N84854-9045 Male 1/4 NPT
Part# N84854-9046 Male 1/2 NPT

Also have Deutsch DT,DTP and DTHD series connectors in stock
marinettejoe
Posted: Thursday, April 03, 2008 7:22:29 PM

Rank: Administration
Groups: Administration , Member, Other Mods

Joined: 12/3/2007
Posts: 239
Points: 200
Location: Stafford
Thanks just ordered a few from Wesgarde. It's the 9001 and 9004 panel mounts they ordered that I needed.

Unzinced ships sink at slips.
Users browsing this topic
Guest2


Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Main Forum RSS : RSS

Powered by Yet Another Forum.net version 1.9.1.6 (NET v2.0) - 11/14/2007
Copyright © 2003-2006 Yet Another Forum.net. All rights reserved.
This page was generated in 0.187 seconds.