Rank: Marinette Royal Aluminum Poster (300+) posts
Groups: Member
Joined: 12/10/2007(UTC)
Posts: 612
Points: 1,739
Thanks: 5 times
Was thanked: 5 time(s) in 4 post(s)
|
This is from  Norm. What I’ve done to solve the wiper problem was to drill thru the blade clip into the arm with a # 36 drill then tapped some 6-32 threads. Then drilled a 1/8" hole in the blade clip and screwed the blade clip to the arm. Now I can go into Wally Marts and buy their "el-cheapo" blade for around $2. When you have to replace the blade, line the clip with the tapped drill hole and drill a 1/8" hole where it should be. Next thing you know, you are into a nice clean windshield when it rains and the heavy seas won't rip them off either. That little nub that come with the original arm just ain’t got it. AnyWho it works for me.  Norm Posted with Norm's blessings Surface Interval 1975 28' Express, Single Chrysler M360 ('87), Raymarine E120 MFD, HD digital sonar, GPS, 4KW radome, Sirius satellite weather,
X-10 autopilot with ST70 controller, Yahama 15HP 4 stroke electric start and tilt with hyd steering & remote throttle control,
Floscan 9000, ACR Sat2 406 EPIRB, 24 volt stern thruster, Interlux Brightside paint ('06-'08) Trilux 33 on bottom,
Big Jon electric downriggers, Fish Hawk X4, Traxtech swivel mounts, Bert's track and ratchet holders. Click here for all the equipment details and here for the complete photo album.
|
Please Register : To weed out spammers, new members may not post until approved. An email is usually sent after approval.
This forum is for Marinette Owners and other aluminum boat boaters who wish to share boating information. Aluminum Roamer owners are also welcome. (Do not post content you do not have the right to post and mass (robots) posters are unwelcome. We also have a marine electronics page and lots of Chrysler Engine info. State by what permission you copy content and give credit properly.) The site is now fixed with some more Chrysler information. We have space for pictures on the new location. Use shinkpic to autochange size http://www.onthegosoft.com/sp_download.htm
Great Sites - http://www.marinette.com Marinette Company
http://web.me.com/dougmrose/Doug_Roses_Website/Welcome.html
http://fastjeff.tripod.com/ Repair Tricks and Techniques for Marinettes
http://www.greatlakesmarinetteclub.com/
PLEASE post in the appropriate folder. Please, do not post your actual email address in publicly readable websites.
The first rule is be a class act.
|
